Sony DAV-SR4W 28GB, To hang the IR receiver on a wall, To hang the IR transmitter on a wall, 1 Rotate the stand of the IR transmitter, Install the screws 30 mm apart

Hanging the IR transmitter and IR receiver on a wallYou can hang the IR transmitter and IR receiver on a wall when:–there is an obstruction between the IR transmitter and the IR receiver.–people often pass between the IR transmitter and the IR receiver.

When hanging both the IR transmitter and IR receiver, adjust the position of the IR transmitter after deciding the position of the IR receiver.

To hang the IR receiver on a wall

1 Install a commercially available screw in the wall so that it protrudes 4 mm.

To hang the IR transmitter on a wall1 Rotate the stand of the IR transmitter.

IR transmitter

4 mm

2 Detach the IR receiver stand and hang it via hole on the rear side of the IR receiver on the screw.

Make sure that the IR receiver does not move after installation.

IR receiver

Stand

2 Install 2 commercially available screws in the wall so that it protrudes 4 mm.

Install the screws 30 mm apart.

30 mm

4 mm

IR receiver stand

Tip

When reattaching the IR receiver stand to the IR receiver, attach the stand so that both delta marks on the IR receiver and stand are aligned (page 13).

28GB