Notes
• When you adjust the speaker settings, the sound cuts off for a moment.
• The surround back speaker level can be also adjusted on the amplifier that is connected to the surround back speaker.
Tip
To adjust the balance or the level without listening to the test tone, select [BALANCE] or [LEVEL] in step 3 and press ENTER. Then adjust the balance or level using X/x and press ENTER.
Press X/x repeatedly to select [TEST
TONE], then press ENTER.
Press ENTER when you have finished making adjustments.
6
7
8 Press X/x repeatedly to select [OFF], then press ENTER.
From your listening position, adjust the value of [BALANCE] and [LEVEL] using C/X/x/c.
When selecting [BALANCE], the test tone is emitted from both left and right speakers simultaneously.
When selecting [LEVEL], the test tone is emitted from only the speaker which you are adjusting.
5
3 Press X/x repeatedly to select [TEST TONE], then press ENTER or c.
4 Press X/x repeatedly to select [ON], then press ENTER.
You will hear the test tone from each speaker in sequence.
Press DVD SETUP in stop mode. The Setup Display appears.
Press X/x repeatedly to select [SPEAKER SETUP], then press ENTER or c.
1
2
Adjusting the speaker balance and level by using the test tone
xBALANCE

You can vary the balance of the left and right speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

FRONT Adjusts the balance between the front (CENTER) left and right speakers.

The center position is shown as

“---.” (You can adjust from the center 6 steps to left or right.)

To adjust the volume of all the speakers at one timeUse the VOLUME control on the system, or press VOL +/–.xTEST TONEThe speakers will emit a test tone to adjust [LEVEL] and [BALANCE].

OFF The test tone is not emitted from the speakers.

ON The test tone is emitted from both left and right speakers simultaneously while adjusting balance. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjustments and Settings

85GB