Press AMP MENU.

Step 4: Connecting the AC Power Cords (Mains Leads)

Before connecting the AC power cords (mains leads) of this system and the surround speaker (L) to a wall outlet (mains), connect the front and center speakers to the system and surround speaker (R) to the surround speaker (L) (see page 14).

When placing the surround speaker (L) in the (R) position

Depending on the location of the wall outlet (mains), you can also place the surround speaker

(L)(with the IR receiver) in the (R) position if necessary.

"/1

4

5

Press X/x repeatedly until “SL SR

REV” appears in the front panel display, then press ENTER or c.

Press X/x repeatedly until the item you want to set appears in the front panel display.

xOFF (default)Sets the surround speaker (L) (with the IR receiver) in the (L) position.xONSets the surround speaker (L) (with the IR receiver) in the (R) position.
6 Press AMP MENU.The AMP menu turns off.

C/X/x/c/

ENTER

AMP MENU

With cover opened.

1 Press "/1 on the system to turn the system on.

2

3 Press X/x repeatedly until “CUSTOMIZE” appears in the front panel display, then press ENTER or c.

The system enters the Customize Menu mode.
24GB