To set the item, press X/x, then press ENTER or AMP MENU.You can set the following items. The default settings are underlined.

xSP SETUP

CENTER SP

CENTER Y: Select this if you

(center

use a center speaker.

speaker)

CENTER N: Select this if no

 

 

center speaker is used.

 

 

SURR SP

SURR Y: Select this if you

(surround

use surround speakers.

speakers)

SURR N: Select this if no

 

 

surround speaker is used.

 

 

SURR B SPa)

SURR B N: Select this if no

(surround

surround back speaker is

back

used.

speaker)

SURR B Y: Select this if you

 

 

use a surround back speaker.

 

 

F DIST

Front speaker distance from

(front

the listening position can be

distance)

set in 0.2 meter increments

1.6mb)

from 1.0 to 7.0 meters.

 

 

 

CEN DISTc)

Center speaker distance can

(center

be moved up to 1.6 meters

distance)

closer to the listening position

1.6mb)

from the front speaker

 

 

distance, in 0.2 meter

 

increments.

 

 

SURR DISTc)

Surround speaker distance

(surround

can be moved up to 4.6 meters

distance)

closer to the listening position

1.6mb)

from the front speaker

 

 

distance, in 0.2 meter

 

increments.

 

 

SB DISTc)

Surround back speaker

(surround

distance can be moved up to

back

4.6 meters closer to the

distance)

listening position from the

1.6mb)

 

front speaker distance, in 0.2

 

meter increments.

b)When you perform the Quick Setup (page 30), the default settings are changed.

c)This setting appears when you set the corresponding speaker to “Y” in “SP SETUP” (page 87).

xLEVEL

TEST TONE

T. TONE OFF: The test tone is

(test tone)

not emitted from the speakers.

 

T. TONE ON: The test tone is

 

emitted from both left and

 

right speakers simultaneously

 

while adjusting balance. When

 

you select one of the

 

“LEVEL” items, the test tone

 

is emitted from each speaker in

 

sequence.

 

 

F BALANCE

Adjusts the balance between

(front

the front left and right

balance)

speakers. (You can adjust from

0

the center 6 steps left (L6) or

 

 

right (R6).)

 

 

CEN LEVELb)

Adjusts the level of the center

(center level)

speaker (–6 dB to +6 dB, 1 dB

0a)

increments).

 

 

 

SL LEVELb)

Adjusts the left level of the

(surround

surround speaker (–6 dB to +6

left level)

dB, 1 dB increments).

0a)

 

SR LEVELb)

Adjusts the right level of the

(surround

surround speaker (–6 dB to +6

right level)

dB, 1 dB increments).

0a)

 

SB LEVELb)

Adjusts the level of the

(surround

surround back speaker (–10

back level)

dB to +10 dB, 1 dB

0a)

increments).

 

 

 

SW LEVEL

Adjusts the level of the

(subwoofer

subwoofer (–6 dB to +6 dB, 1

level)

dB increments).

+4a)

 

AUDIO DRC

DRC OFF: No compression of

(dynamic

DYNAMIC range.

compression)

 

Adjustments and Settings

SP POSc) (surround speakers position)

SP BEHIND: Select this if surround speakers are located in the back area of the listening position.

SP SIDE: Select this if surround speakers are located in the side area of the listening position.

DRC ON: Reproduces the

sound track with the kind of

DYNAMIC range that the

recording engineer intended.

a)

When you perform the Quick Setup (page 30),

 

the default settings are changed.

b)

This setting appears when you set the

 

corresponding speaker to “Y” in “SP SETUP”

a)This setting appears when you set “SURR SP” to “SURR Y” in “SP SETUP.”

(page 87).

continued

87GB