18Frequently asked questions
No signal bar is displayed on the screen.
•• The handset is out of range. Move it closer to the base station.
•• If the handset displays [Unregister], put the handset on the base until the signal bar appears..
Tip
•• For further information, see 'Register the handsets' on the Services section.
If I fail to register the additional handsets to the base station, what do I do?
Your base memory is full. Unregister the unused handsets and try again.
No dialing tone
•• Check your phone connections.
•• The handset is out of range. Move it closer to the base station.
No docking tone
•• The handset is not placed properly on the base station/charger.
•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.
I cannot change the settings of my voice mail, what do I do?
The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.
The handset on the charger does not charge.
•• Make sure the batteries are inserted correctly.
•• Make sure the handset is placed properly on the charger.The battery icon animates when charging.
•• Make sure the docking tone setting is turned on.When the handset is placed correctly on the charger, you can hear a docking tone.
•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.
•• Batteries are defective. Purchase new ones from your dealer.
No display
•• Make sure the batteries are charged.
•• Make sure there is power and the phone is connected.
Bad audio (crackles, echo, etc.)
•• The handset is nearly out of range. Move it closer to the base station.
•• The phone receives interference from the nearby electrical appliances. Move the base station away from them.
•• The phone is at a location with thick walls. Move the base away from them.
The handset does not ring.
Make sure the handset ringtone is turned on. The caller ID does not display.
•• The service is not activated. Check with your service provider.
•• The caller's information is withheld or unavailable.
Note
•• If the above solutions do not help, disconnect the power supply from both the handset and base station. Try again after 1 minute.
English
EN 45
