Philips CD491, CD496 user manual Important safety instructions, Power requirements, 60950, English

Models: CD496

1 56
Download 56 pages 8.34 Kb
Page 5
Image 5
1Important safety instructions

1Important safety instructions

Power requirements

This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost.

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN

60950.

Power requirements Warning

•• The Electrical network is classified as hazardous.The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

To avoid damage or malfunction

60950. Caution

•• Use only the power supply listed in the user instructions.

•• Use only the batteries listed in the user instructions.

•• Risk of explosion if battery is replaced by an incorrect type.

•• Dispose of used batteries according to the instructions.

•• Always use the cables provided with the product.

•• Do not allow the charging contacts or the battery to come into contact with metal objects.

•• Do not let small metal objects come into contact with the product.This can deteriorate audio quality and damage the product.

•• Metallic objects may be retained if placed near or on the handset receiver.

•• Do not use the product in places where there are explosive hazards.

•• Do not open the handset, base station or charger as you could be exposed to high voltages.

•• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

•• Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.

•• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

•• Do not allow the product to come into contact with liquids.

•• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

•• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

•• Do not drop your phone or allow objects to fall on your phone.

•• Active mobile phones in the vicinity may cause interference.

When using the phone as a baby monitor

To avoid damage or malfunction Caution

•• Children should be supervised to ensure that they do not play with the appliance.

•• Make sure the baby unit and the cord are always out of reach of the baby (at least 1 metre/3 feet away).

•• Keep the parent unit at least 1.5 metres/5 feet away from the baby unit to prevent acoustic feedback.

•• Never place the baby unit inside the baby’s bed or playpen.

•• Never cover the parent unit and the baby unit with anything (e.g. a towel or blanket). Always make sure the cooling vents of the baby unit are free.

•• Take every precaution to make sure that your baby can sleep safely .

•• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•• If you place the parent unit next to a transmitter or other DECT appliance (e.g. a DECT telephone or wireless router for the internet), the connection with the baby unit may be lost. Move the baby monitor further away from the other wireless appliances until the connection is restored.

•• This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

About operating and storage temperatures

Operate in a place where temperature is always between 0°C to +40°C (up to 90% relative humidity).

Store in a place where temperature is always between -20°C and +45°C (up to 95% relative humidity).

Battery life may be shorter in low temperature conditions.

English

EN 3

Page 5
Image 5
Philips CD491, CD496 Important safety instructions, Power requirements, 60950, To avoid damage or malfunction, English