Set the dial mode
1 | Select [Menu] > > [Dial mode], then |
2 | press [OK] to confirm. |
Select a dial mode, then press [OK] to | |
| confirm. |
»»The setting is saved.
Note
•• If your phone is in pulse dial mode, press 
during a call for temporary tone mode. Digits entered for this call are then sent out as tone signals.
First ring
If you have subscribed to the caller ID service with your service provider, your phone can cancel the first ring before the caller ID is displayed on the screen. After the phone is reset, it can detect automatically if there is a caller subscription and start to cancel the first ring.You can change this setting to suit your preference. This feature only applies to models with first ring support.
Turn the first ring on/off
1 | Select [Menu] > > [First ring], then |
2 | press [OK] to confirm. |
Select [On]/[Off], press [OK] to confirm. |
»»The setting is saved.
Note
•• To reset the first ring status, go to the reset menu.
Auto clock | h | ||
| Note | Englis | |
| |||
|
|
|
|
•• This service is network dependent.
•• Make sure you have subscribed to the caller ID service before you use this feature.
It synchronizes the date and time on your phone with the public switched telephone network (PSTN) automatically. For the date to be synchronized, ensure the current year is set.
1 | Select [Menu] > > [Auto clock], then |
2 | press [OK] to confirm. |
Select [On]/[Off] . Press [OK]. |
»»The setting is saved. .
Register the handsets
You can register additional handsets to the base station.The base station can register up to 5 handsets.
Auto registration
Place the unregistered handset on the base station.
»»The handset detects the base station and registers automatically.
»»Registration is completed in less than two minutes.The base station automatically assigns a handset number to the handset.
EN 29
