Philips CD496 Charge the handset, Change the remote access PIN code, Check the battery level

Set the date and time format

1	Select [Menu] > > [Date & time], then
2	press [OK] to confirm.
	Select [Date format] or [Time format].
3	Press / to select [DD-MM-YYYY] or

[MM-DD-YYYY] as the date display, and [12 Hours] or [24 Hours] as the time display.Then press [OK] to confirm. »»The setting is saved.

Note

•• The date and time format setting is country dependent.

Charge the handset

Place the handset on the base station to charge the handset.When the handset is placed correctly on the base station, you hear a docking sound.

»»The handset starts charging.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

Your phone is now ready to use.

Change the remote access PIN code

Note

•• The default answering machine remote access PIN code is 0000 and it is important to change it to ensure the security.

1	Select [Menu] > > [Remote access] >
2	[Change PIN], then press [OK] to confirm.
	Enter the old PIN, then press [OK] to
3	confirm.
	Enter the new PIN code, then press [OK]
4	to confirm.
	Enter the new PIN code again, then press
	[Save] to confirm.

»»The setting is saved.

Check the battery level

The battery icon displays the current battery level.

When the handset is off the base station/charger, the bars indicate the battery level (from full to low). When the handset is on the base station/charger, the bars flash until charging is complete.

The empty battery icon flashes.The battery is low and needs recharging.

If you are on the phone, you hear warning tones when the batteries are almost empty. The handset turns off when the batteries are completely empty.

10EN