Answer a call
When there is an incoming call, the phone rings and the LCD backlight flashes.Then you can:
•press 
or 
to answer the call.
•select [Divert] to send incoming call to the answering machine (applicable to CD496 only).
•select [Silent] to turn off the ringer of the current incoming call.
Warning
•• When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage.
Note
•• The caller ID service is available if you have registered to the caller ID service with your service provider.
Tip
•• When there is a missed call, a notification message appears.
Adjust the earpiece/speaker | glish |
volume | |
| En |
Press 
/ 
on the handset to adjust the volume during a call.
»»The earpiece/speaker volume is adjusted and the phone is back to the call screen.
Mute the microphone
1 Press during a call.
»»The handset displays [Mute on].
»»The caller cannot hear you, but you can still hear his voice.
2 Press again to unmute the microphone.
»»You can now communicate with the caller.
Turn the speaker on or off
Press 
.
Turn off the ringer for an incoming call
When the phone rings, press [Silent].
End a call
You can end a call in these ways:
•Press 
; or
•Place the handset to the base station or charging cradle.
Make a second call
Note
•• This service is network dependent.
1 Press | during a call. |
»»The first call is put on hold.
2 Dial the second number.
»»The number displayed on the screen is dialed out.
EN 13
