Turn on the TV. Press [/1.

Getting Started – BASIC –

Step 3: Performing the Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the system.

"/1

FUNCTION

C/X/x/c,

DISPLAY

1

2

3 Press FUNCTION repeatedly until “DVD” appears in the front panel display.

4 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 19).

5 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

6 Press X/x to select a language.

The system displays the menu and subtitles in the selected language.

7 Press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

 

SCREEN SETUP

 

 

 

 

TV TYPE:

 

16:9

 

 

HDMI RESOLUTION:

 

16:9

 

 

YCBCR/RGB (HDMI):

4:3 LETTER BOX

 

 

SCREEN SAVER:

4:3 PAN SCAN

 

 

BACKGROUND:

JACKET PICTURE

 

 

BLACK LEVEL:

 

ON

 

 

BLACK LEVEL (COMPONENT OUT):

OFF

 

 

4:3 OUTPUT:

 

FULL

 

 

 

 

 

8 Press X/x to select the setting that matches your TV type.

xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

[16:9] (page 80)

xIf you have a 4:3 standard TV

[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 80)

9 Press .

The [AUTO CALIBRATION] display appears.

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

10 Connect the calibration mic to the A.CAL MIC jack on the rear panel, and set it up at the ear level using a tripod, etc. (not supplied).

The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

18US