Sony DAVX10 42US, is used, 9 Press, Press "/1, Press X/x to select, [SETUP], then press, Setting [STB SYNCHRO], Enjoying digital sound, Press X/x to select [ON]

Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync

Setting [STB SYNCHRO]

1	Press "/1.
2	Press DISPLAY when the system is in stop mode.
3	Press X/x to select	[SETUP], then press .
4	Press X/x to select [CUSTOM], then press .
5	Press X/x to select [CUSTOM SETUP], then press .
	Note
6	• In order to set the [STB SYNCHRO] function, first set [HDMI CONTROL] to [ON] (page 36).
	Press X/x to select [STB SYNCHRO], then press .
7	Press X/x to select [ON].
	The default setting is underlined.
	• [OFF]: sets the [STB SYNCHRO] function to off.
8	• [ON]: sets the [STB SYNCHRO] function to on.
	Set the switch on the rear panel according to whether an OPTICAL or COAXIAL cord (C)
	is used.
			DIGITAL IN
			OPTICAL COAXIAL
			SAT/
			CABLE
			COAXIAL

9 Press .

The setting is made.

Tip

•You can operate this function on STB or a digital satellite receiver which is not compatible with HDMI CONTROL function.

Note

•Depending on the TV, this function may not work when STB or a digital satellite receiver is connected to the HDMI 1 jack of the TV.

Enjoying digital sound

Select the HDMI input of your TV connected to the STB or digital satellite receiver (HDMI 1 shown above).

The system accepts the signal from the SAT/CABLE (DIGITAL IN COAXIAL or OPTICAL) jack automatically and outputs the sound of the STB or digital satellite receiver from the speakers of the system.

42US