Sony DAVX10 19US, cto select [YES], To quit the Quick Setup, – BASIC – Started Getting, To recall the Quick Setup display, 11 Press X/x to select [YES], then press

	DIGITAL IN		1	2	DMPORT	OUT
						ANTENNA
TV	SAT/	AUDIO		COMPONENT VIDEO OUT		A.CAL AM
	CABLE	IN	TV
						MIC
	IMPEDANCE USE 4
		VIDEO				FM
	SPEAKER	AUDIO	VIDEO	AUDIO	VIDEO	75 COAXIAL
		SAT/CABLE IN		VIDEO IN	MONITOR OUT

A.CAL

MIC

ECM-AC2

Calibration mic

11 Press X/x to select [YES], then press

.

[AUTO CALIBRATION] starts. Be quiet during the measurement.

Note

•Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbors.

•Avoid being in the measurement area and making noise during the measurement (which takes about 1 minute), as it may interfere with measurement.

12 Unplug the calibration mic and press C/cto select [YES].

Quick Setup is finished. All connections and setup operations are complete.

Measurement complete.
FRONT L :	10 1/4 ft	3.12m	0.0dB
FRONT R :	11ft	3.35m	+ 0.5dB
SUBWOOFER :	11ft	3.35m	+ 1.0dB

If OK, unplug calibration mic and select “YES”.

YES NO

Note

•The environment of the room in which the system is installed may affect measurements.

•If measurement fails, follow the message then retry [AUTO CALIBRATION].

To quit the Quick Setup

Press DISPLAY in any Step.

Tip

•If you change the position of the speakers, reset the speaker settings. See “Calibrating the Appropriate Settings Automatically” (page 75).

•If you want to change any of the settings, see “Using the Setup Display” (page 78).

•If there is no sound from the speakers, check the speaker connection.

To recall the Quick Setup display

1Press DISPLAY when the system is in stop mode.

The Control Menu display appears.

2Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

1 2 ( 2 7 )

1 8 ( 3 4 )		DVD VIDEO
T	1 : 3 2 : 5 5

QUICK

QUICK

CUSTOM

RESET

3Press X/x to select [QUICK], then press .

The Quick Setup display appears.

– BASIC – Started Getting

19US