Set the camcorder’s address so that you can access your camcorder from the computer. You do not need to reset the address as long as the computer is used under same environment.
(1) Touch ADVANCED, then PC CONNECT.
(2)Touch SET UP.
The screen to set IP address, etc. appears.
|
| SET UP RESET |
|
|
|
|
|
| Automatic (DHCP) |
|
|
| |
|
| Manual |
|
|
|
|
ADVANCED |
| IP address | 192 | 168 | 0 | 10 |
| Net mask | 255 | 255 | 255 | 0 | |
RETURN |
| |||||
CONNECT | Gateway |
|
|
|
| |
PC CONNECT | 0 | 0 | 0 | 0 | ||
SET UP RESET | SET UP |
|
| CANCEL |
| EXEC |
DISC FORMAT |
|
|
|
| ||
|
|
|
|
|
|
(3)Touch MANUAL to put a black dot in the white circle. You can set the IP address, net mask, and gateway.
(4)Set the IP address.
You can keep as it is, or put any desired number. This number becomes your camcorder’s homepage address.
Net mask: For example, set to 255.255.255.0.
Gateway: If you are not sure, set to 0.0.0.0.
SET UP RESET |
|
|
|
|
Automatic (DHCP) |
|
|
| |
Manual |
|
|
|
|
IP address | 192 | 168 | 0 | 10 |
Net mask | 255 | 255 | 255 | 0 |
Gateway | 0 | 0 | 0 | 0 |
|
| CANCEL |
| EXEC |
(5)Touch EXEC.
If you change the setting, touch CANCEL and repeat from step 1.
(6)Touch CONFIRM.
The camcorder automatically turns off and on again. The setting is completed.
To set the IP address on the computerSet the IP address on the computer in accordance with your camcorder. In case of the above setting (192.168.0.10), set as follows:
IP address: 192.168.0.X (X can be any number from 1 to 254 except 10. Do not use the same number for the last digit as that of the camcorder’s IP address.)
Net mask: 255.255.255.0
Gateway: Keep blank.
To operate the menu
You can use the control dial.
To return to the previous screenTouch RETURN.
The first digit of IP addressChanges ranging from 0 to 223.
Equipment Other with Using
101