Checking the track informationLabelling the track

You can label a track using up to 100 characters.

(1)Touch the track name box on the track information display.

(2)Input characters (p. 80).

Note

You can record up to 100 characters in one track, and 5000 characters in one disc.

You cannot label the track if: •the disc is protected.

•the track is protected (✔is in the PROTECT box).

Marking a track

Mark the tracks which you want to distinguish from others. If you select “MARK” in “SORT” in the PLAY menu, those marked tracks are displayed together at the top of the index display.

(1)Touch the MARK box in the track information display to indicate ✔. icon will be displayed on the marked tracks.

TRACK INFORMATION

0002 01:23 12.24.1999 1:30 PM

MARK

 

PROTECT

DATA RATE 8.00 Mbps

 

CLOSE

To cancel the mark setting

Touch the MARK box again to erase ✔.

You cannot mark the track if: •the disc is protected.

•the track is protected (✔is in the PROTECT box).

To mark using the Remote Commander

Select the desired track on the index display, then press MARK on the Remote Commander.

To mark tracks during playback

(1)Press MARK on the Remote Commander while playing back the track. The track is played back repeatedly and the confirmation message appears.

(2)Select YES using B/b, then press ENTER.

To cancel the mark setting

Press MARK again during playback.

60