Viewing the recording on TV
Connect your camcorder to your TV or VCR with the A/V connecting cable supplied with your camcorder to watch the playback picture on the TV screen. You can operate the video control buttons in the same way as when you monitor playback pictures on the LCD screen. When monitoring the playback picture on the TV screen, we recommend that you power your camcorder from a wall outlet using the AC adaptor/ charger (p. 15). Refer to the operating instructions of your TV or VCR.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting cable supplied with your camcorder. Then, set the TV/VCR selector on the TV to VCR.
S VIDEO | INPUT |
|
Yellow |
| |
S VIDEO | TV | |
|
| |
| VIDEO |
|
White | AUDIO |
|
|
| |
: Signal flow |
|
|
Red |
|
|
Basics – Playback
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting cable supplied with your camcorder. Set the input selector on the VCR to LINE.
If your TV or VCR is a monaural typeConnect the yellow plug of the A/V connecting cable to the video input jack and the white or the red plug to the audio input jack on the VCR or the TV. If you connect the white plug, the sound is L (left) signal. If you connect the red plug, the sound is R (right) signal.
If you want to hear in monaural, use a monaural audio cable (not supplied).
If your TV or VCR has an S video jackConnect using an S video cable (not supplied) to obtain
Connect the S video cable (not supplied) to the S video jacks on both your camcorder and the TV or the VCR.
35