Step 2 Inserting an MD DATA2 disc

Use an MD DATA2 disc. You cannot record on other types of MDs.

(1)Lift the bOPEN protrusion and open the LCD panel until it stops.

(2)Slide DISC EJECT on the bottom in the direction of the arrow and open the lid manually.

(3)Insert the disc.

Push the disc in the direction of the arrow deeply into the disc compartment with the label facing up.

(4)Close the disc lid.

1

2

DISC EJECT

 

 

3

4

2

 

1

To eject the disc

Follow the procedure above, and take out the disc in step 3.

Notes

•If the POWER switch is set to “CAMERA” or “INTERVIEW,” you may not be able to eject the disc. If this happens, turn off the power first and then reconnect the power sources. Then try again.

•Do not face the disc opening down when you insert or eject a disc to avoid dropping the disc.

To prevent misoperation

Turn the POWER switch to “OFF” when you insert or eject a disc.

16