— Finalizing a disc for other players —
Finalizing a disc
You have to finalize the disc before you can play a recorded disc on other players. Finalizing makes the recorded disc
Note that you cannot record additional materials on finalized discs in VIDEO mode. But you can record on a disc again if you unfinalize the disc when you use
FINALIZE
FINALIZE button
Notes
•Do not apply shock or vibration to your camcorder during finalizing.
•Do not disconnect the AC adaptor during finalizing or the disc may be damaged. When you need to disconnect the AC adaptor, make sure that the power of your camcorder is set to off and disconnect the adaptor after the POWER/CHG lamp goes off. Finalizing restarts when you connect the AC adaptor and turn on your camcorder again. You cannot remove the disc until the finalizing operation is completed.
Place your camcorder in a stable position. It takes about a minute to a few hours for finalizing. The shorter the amount of material recorded, the longer it takes for finalizing.
1 Connect the AC adaptor to the DC IN jack on your camcorder, then connect the mains lead to the wall socket.
2 Turn the power on by pressing the POWER button for a few seconds.
3 Press the FINALIZE button.
The [FINALIZE] display appears on the LCD display.
FINALIZE
DISC TITLE READY
PHOTOMOVIE
EXECUTE
RETURN
EST. PROCESS TIME : 3min
DISC TITLE :
1 1 2004 8 : 48
PHOTOMOVIE :
[ FINALIZE ] : END
players other for disc a Finalizing
When you want to change a disc title, use the
65