Changing the SETUP display

Icon/item

Option

Meaning

Mode dial

OTHERS

 

 

 

REMAIN zAUTO

To display the remaining capacity of the disc in

 

the following cases for example:

•For 8 seconds after setting the power on and the mode dial to (Movie) or (Still)

•For 8 seconds after recognizing the inserted

disc into your camcorder in (Movie) or (Still)

•For 8 seconds when set the display to on by pressing DISPLAY/BATT INFO in (Movie) or (Still)

•When the remaining capacity of the disc is less than 5 minutes in (Movie) or 20 in (Still)

•For 8 seconds when starting recording from the line input

Movie

Still

Play/Edit

ON

To always display the remaining capacity of

 

the disc

Notes

•If you press DISPLAY/BATT INFO with [DISPLAY] set to [V-OUT/LCD] in the SETUP display, the picture from a TV or VCR will not appear on the LCD display even when your camcorder is connected to outputs on the TV or VCR.

•If more than five minutes passes after removing the power source, the [PROGRAM AE], [FLASH LVL], [WHT BAL], [COMMANDER], and [HiFi SOUND] settings are returned to their factory settings. Other settings are held in memory even when the battery is removed.

Tip

When recording a close subject, if [REC LAMP] is set to [ON], the red camera recording lamp on the front of the camcorder may reflect on the subject if it is close. In this case, it is recommended to set [REC LAMP] to [OFF].

camcorder your Customizing

115