Making a disc copy – Disc Dubbing

Making a disc copy

You can make a copy of a finalized disc.

1

Turn on your computer and allow

2

Windows to load.

 

Connect the AC adaptor to your

3

camcorder.

 

Set the mode dial to

(Play/Edit).

4

Turn the power on your camcorder by

 

sliding the POWER switch upward

5

while pressing the green button.

Insert a recorded disc into your

6

camcorder.

 

Connect the (USB) jacks of the

 

camcorder and the

(USB) port of the

computer using the USB cable supplied with your camcorder.

USB port

USB cable

USB jack

7 Start the ImageMixer software on your computer.

8 Click on the left of the screen.

9 Click (Duplication).

The confirmation screen appears.

10 Click [OK].

11 When the copy completion message appears, eject the disc and insert a new disc into your camcorder.

12 Click [OK].

Copying of data from your computer to the new disc starts. When the disc copy operation is completed, a screen asking if you want to make an additional copy appears.

13 If you want to make an additional copy, click [OK].

The making of an additional copy starts. If you do not want to make an additional copy, click [Cancel] to end the procedure.

14 Eject the disc following the instructions given in the on-screen messages.

Notes

•It may take some time to save the scene depending on the recording mode (page 33) and the length of the movie.

•You cannot make a copy of an unfinalized disc.

•Using DVD-RWs for the copied media prevents you from unfinalizing and making additional recordings on your camcorder because the format of copied media is different from that of your camcorder. You must format the DVD-RW to record additional material on the disc.

Tip

To use the disc with other DVD authoring applications, an export procedure is required. For details, see the ImageMixer on-line help.

100