Connecting an analog VCR to the computer via your camcorder (Signal convert function) (Continued)

2 Slide the POWER switch of your camcorder repeatedly to turn on the PLAY/EDIT lamp.

3 On the LCD screen, touch t[MENU] t (STANDARD SET) t [A/V t DV OUT] t [ON]

t t .

4 Start playback on the analog video unit.5 Start capturing procedures on your computer.

Regarding operation, refer to the operating instructions supplied with the software or the on-line help.

After capturing images and sound, stop capturing procedures on your computer, and stop playback on the analog video unit.

•The bundled software Picture Package or ImageMixer VCD2 does not support the signal convert function.

•You may not be able to output the pictures correctly depending on the condition of the analog video signal input to your camcorder.

•You cannot transfer pictures with copyright protection signals to a computer.

•You can use a USB cable instead of an i.LINK cable to transfer pictures to a computer. Note, however, that the picture displayed may lack the same smoothness.

•When you are using the USB cable or an i.LINK cable to connect your camcorder to a computer, make sure you insert the connectors in the correct way. If you insert the connectors forcibly, damage may occur and cause camcorder malfunction.

98