Step 2: Charging the battery pack

You can charge the battery after attaching the “InfoLITHIUM” battery pack (P series) (p.95) to your camcorder.

•You cannot use an NP-FP30 battery pack with your camcorder. (See the reverse side of the battery pack for the model number.) Installing the battery pack with excess force may lead to camcorder malfunction such as deterioration in battery pack performance or difficulty in removing the battery pack.

POWER switch

2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting).

ON OFF

MODE (CHG)

CHG lamp

DC IN jack

Jack cover

DC plug

Power cord

Battery pack

POWER

3 Connect the AC Adaptor to the DC IN jack on your camcorder.

Open the jack cover to connect the AC Adaptor.

AC Adaptor

To the wall outlet

1 Slide the battery pack in the direction of the arrow until it clicks.

Jack cover

Face down the vmarkto match the v mark of the camcorder.

4 Connect the power cord to the AC Adaptor and the wall outlet.

The CHG (charge) lamp lights up and charging starts.

CHG

16