Functions used for recording/playback, etc. (continued)

To record in mirror mode............

qs

Open the LCD screen qs 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2).

A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded.

To use a tripod........................

qg

Attach the tripod (optional: the length of the screw must be less than 5.5 mm) to the tripod receptacle qg using a tripod screw.

To attach the shoulder belt .........

0

Attach the shoulder belt (optional) with your camcorder to the hook for the shoulder belt.

Playback

 

To play back a series of

 

still images (Slide show) ...........

6

Touch on the still image playback screen (p.31).

The slide show begins from the selected image.

Touch to stop the slide show. To restart,

touch again.

You can touch to set continuous slide show playback. The default setting is [ON] (continuous playback).

You cannot operate playback zoom during slide show.

To use Playback zoom............

17

You can magnify images from about 1.1 to 5 times the original size.

Magnificationcanbe adjusted withthe power zoom lever 1 or the zoom buttons 7 on the LCD frame.

1Play back the image you want to magnify.

2Magnify the image with T (Telephoto). A frame appears on the LCD screen.

3Touch the portion that you want to display in the center of the LCD screen.

4Adjust the magnification with W (Wide angle)/T (Telephoto).

To cancel, touch [END].

You cannot change the zoom speed with the zoom buttons 7 on the LCD frame.

36