Troubleshooting (continued)

Playback

“ ” is indicated on an image in the VISUAL INDEX screen.

•Loading of the data may have failed. It may be indicated correctly when you turn off the power and then turn it on again.

•You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned on after

recording. This may damage your image data and is displayed.

“” is indicated on an image in the VISUAL INDEX screen.

• The image data is damaged. Delete the image marked with (p.45).

No sound or only a low sound is heard when playing back.

•Set [MULTI-SOUND] to [STEREO] (p.61).

•Turn up the volume (p.31).

•Sound is not output when the LCD screen is closed. Open the LCD screen.

•When you record sound with [MICREF LEVEL] (p.61) set to [LOW], the recorded sound may be difficult to hear.

Image data

Images cannot be deleted.

• Protected images cannot be deleted. Cancel the image protection (p.70).

The data file name is not indicated correctly.

•Only the file name is displayed if the directory structure does not conform to the camcorder standard.

•The file is damaged.

•The file format is not supported on your camcorder (p.94).

The data file name flashes.

•The file is damaged.

•The file format is not supported on your camcorder (p.94).

Setup items

Setup items are grayed out.

• You cannot select grayed items in the current situation.

is not displayed.

•You can operate limited operations during Easy Handycam operation. Cancel Easy Handycam operation (p.27).

84