Sony DCR-SR100E Playing the image on a TV

Playing the image on a TV

Connect your camcorder to the input jack of TV or VCR using A/V connecting cable 1 or A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p.14). Refer also to the instruction manuals supplied with the devices to be connected.

• To view the recorded images on a computer, see “Computer Application Guide”.

A/V jack

(Yellow) (White) (Red)

IN

S VIDEO VIDEO AUDIO

VCRs or TVs

: Signal flow

1A/V connecting cable (supplied)

Connect to the input jack of the other device.

2A/V connecting cable with S VIDEO (optional)

When connecting to another device via the S VIDEO jack, by using an A/V connecting cable with an S VIDEO cable (optional), higher quality images can be produced than with an A/V connecting cable. Connect the white and red plug (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with an S VIDEO cable (optional). The yellow plug connection is not necessary. S VIDEO connection only will not output audio.

When your TV is connected to a VCR

Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.), if the VCR has an input selector.

To set the aspect ratio according to the connected TV (16:9/4:3)

Change the setting according to the screen aspect ratio of the TV you will view images on.

1Slide the POWER switch to light up the

(PLAY/EDIT) lamp.

2Touch t [SETUP] t STANDARD SET t [TV TYPE] t [16:9] or [4:3] t .

•When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.

•If you connect the camcorder to a TV, you cannot play back images with 5.1ch surround sound. Using the supplied computer applications (“Computer Application Guide”), you can create aDVD containing movies with the 5.1chsurround sound on an appropriate device.

40