Self-timer recording

You can record still images and moving pictures on the “Memory Stick” with the self- timer. You can also use the Remote Commander for this operation.

PHOTO

START/STOP

PHOTO

START/STOP

Recording a still image

The POWER switch should be set to .

Operate by touching the panel.

(1) Press FN and select PAGE3.

(2) Press SELFTIMER.

The (self-timer) indicator appears on the screen. (3) Press EXIT to return to FN.

(4) Press PHOTO deeply.

The self-timer starts counting down from about 10 with a beep. In the last 2 seconds of the countdown, the beep gets faster, then recording starts automatically.

Recording a moving picture

The POWER switch should be set to .

Operate by touching the panel.

(1) Follow steps 1 to 3 in “Recording a still image.”

(2) Press START/STOP.

The self-timer starts counting down from about 10 with a beep. In the last 2 seconds of the countdown, the beep gets faster, then recording starts automatically.

only) TRV22/TRV33-(DCR Operations Stick” “Memory

To stop the countdown for recording moving picture Press START/STOP. To restart the countdown, press START/STOP again.

To cancel the self-timer

During standby, press SELFTIMER and the (self-timer) indicator disappears from the screen. You cannot cancel the self-timer using the Remote

Commander.

Notes

•The self-timer recording is automatically canceled when self-timer recording is finished.

•You cannot stop the countdown for self-timer recording of the still images.

 

When the POWER switch is set to CAMERA

127

You can also perform self-timer recording (p. 50).