Sony DCR-TRV19, DCR-TRV22, DCR-TRV33 To finish making programs, Operation 1: Making a Program, Dubbing only desired scenes – Digital program editing (on tape)

Dubbing only desired scenes – Digital program editing (on tape)

Operation 1: Making a Program

(1) Insert the cassette for playback into your camcorder, and insert the tape for recording into the VCR.

(2) Press FN to display PAGE1.

(3) Press MENU to display the menu.

(4)	Select VIDEO EDIT in , then press EXEC (p. 185).
(5)	Select TAPE, then press EXEC (DCR-TRV22/TRV33 only).

(6)	Search for the beginning of the first scene you want to insert using the video
	control buttons on the screen, then pause playback. You can fine-adjust one
	frame at a time with	/	.
(7)	Press MARK IN on the screen.
	The IN point of the first program is set, and the upper part of the program

mark changes to light blue.

(8) Search for the end of the first scene you want to insert using the video control buttons on the screen, then pause playback. You can fine-adjust one frame at

a time with / .

(9) Press MARK OUT on the screen.

The OUT point of the first program is set, then the lower part of the program mark changes to light blue.

(10) Repeat steps 6 to 9.

When one program is set, the program mark changes to light blue. You can set 20 programs in maximum.

4			5
OTHERS		EXIT	V I DEO ED I T		0:32:30:14
DATA CODE
BEEP			MARK	START	ED I T UNDO
COMMANDER			IN		SET
D I SPL AY	RETURN
V I DEO ED I T
	TAPE
	MEMORY		TOTAL	0:00:00:00
			SCENE	0
	EXEC	RET.			END

	7			9		10
	V I DEO ED I T		0:08:55:06	V I DEO ED I T	0:09:07:06	V I DEO ED I T		0:10:01:23
	MARK	START	ED I T UNDO	MARK START	ED I T UNDO	MARK	START	ED I T UNDO
	OUT		SET	I N	SET	I N		SET
	TOTAL	0:00:00:00		TOTAL 0:00:13:00		TOTAL	0:00:47:12
	SCENE	0		SCENE 1		SCENE	3
			END		END			END
To finish making programs
Press	END.
The program is stored in memory until the tape is ejected.

90