Recording a still image on a tape

– Tape Photo recording (DCR-TRV19 only)

You can record still images such as photographs. You can record about 510 images in the SP mode and about 765 images in the LP mode on a 60-minute tape.

The POWER switch should be set to .

(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE indicator appears. Recording does not start yet.

To change the still image, release PHOTO, select a still image again, and then press and hold PHOTO lightly.

(2) Press PHOTO deeply.

The still image displayed on the screen when you pressed PHOTO deeply is recorded for about 7 seconds. The sound during those 7 seconds is also recorded.

The still image is displayed on the screen until the recording is completed.

1

2

DCR-TRV19

CAPTURE

FN

•••••••

FN

Notes

•During tape photo recording, you cannot change the mode or setting.

•When recording a still image, do not shake your camcorder. The image may fluctuate. •The tape photo recording function does not work when the fader function is on.

48