Preventing accidental erasure

– Image protection

To prevent accidental erasure of important images, you can protect selected images.

The POWER switch should be set to .

Operate by touching the panel.

(1) Press INDEX to display the index screen.

(2) Press -MARK. The screen to protect the image appears.

(3) Press the image you want to protect. The -indicator appears above the protected image.

1

INDEX

2,3

-MARK

To return to FN

RET.

1

 

MARK

2

 

 

EXIT

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

4

 

 

5

6

 

 

 

 

 

 

 

 

 

 

T

2 / 8 101 t

Press EXIT.

To cancel image protection

Press the image you want to cancel image protection in step 3 again. The -indicator disappears from the image.

Note

Formatting erases all information on the “Memory Stick,” including the protected image data. Check the contents of the “Memory Stick” before formatting.

If the write-protect tab on the “Memory Stick” is set to LOCK You cannot turn on or off the -indicator.

142