Step 2: Charging the battery pack

You can charge the battery by attaching the

“InfoLITHIUM” battery pack (M series)

to your camcorder.

bNotes

•You cannot use batteries other than the “InfoLITHIUM” battery pack (M series) (p. 117).

•Do not short-circuit the DC plug of the AC Adaptor or battery terminals with any metallic objects. This may cause a malfunction.

•Use a nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs.

1 Lift up the viewfinder.

2 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

Battery pack

DC IN jack DC plug

Mains lead

AC Adaptor

To the wall socket

3 With the v mark on the DC plug facing up, connect the AC Adaptor to the DC IN jack on your camcorder.

v mark

4 Connect the mains lead to the AC Adaptor.

5 Connect the mains lead to the wall socket.

14Getting started