7 Touch (decrease)/ (increase) to adjust the following.

For [MTCAM LUMI.]

The color scheme of the bright area in the still image which is to be swapped into a movie. When you want to record only the still image stored on the “Memory Stick” to

a tape, touch on the screen in

[MTCAM LUMI.] until the bar indicator is extended fully to the right side.

For [CAMTM CHROMA]

The color scheme of the blue area in the movie.

For [MTCAM CHROMA]

The color scheme of the blue area in the still image which is to be swapped into a movie.

8 Touch twice.

appears.

9 Start recording.

When you are recording on a tape

Press REC START/STOP.

When you are recording on a “Memory Stick”

Press PHOTO fully.

To cancel MEMORY MIX

Follow steps 1 to 4, then touch [OFF] in step 5.

bNotes

When the overlapping still image has a large amount of white, the image in the thumbnail screen may not be clear.

When you use the MEMORY MIX function in the mirror mode (p. 28), the picture on the LCD screen appears normally, without being mirror-reversed.

You may not be able to play back pictures modified on your computer or recorded with other camcorders on your camcorder.

zTip

The supplied SPVD-012 USB Driver CD-ROM contains sample images for use in MEMORY MIX operations. Refer to the supplied “Computer Applications Guide” for details.

Searching for the starting point

POWER switch

Searching for the last scene of the most recent recording

– END SEARCH

This function is handy when you have played back the tape, for example, but want to start recording right after the most recently recorded scene. The END SEARCH function will not work once you eject the cassette after you have recorded on the tape.

1 Slide the POWER switch repeatedly to select the CAMERA-TAPE mode.

2 Touch .

60min

STBY

0:00:00

EDIT

3 Touch .

The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished.

44Recording