To cancel the operation

Touch [CANCEL].

bNotes

The END SEARCH function will not work correctly when there is a blank section between recorded sections on the tape.

The END SEARCH function does not work for the

tapes recorded on other devices in the Hi8 /

standard 8 mm system.

zTip

You can do this operation also by selecting [END SEARCH] in the menu setting. When PLAY/EDIT mode is selected, you can do this operation by

selecting [END SEARCH] short-cut on . (p. 59)

Searching manually – EDIT

SEARCH

You can search for the start point while viewing the pictures on the screen. The sound is not played back during the search.

1 Slide the POWER switch to select the CAMERA-TAPE mode.

2 Touch .

60min STBY 0:00:00

EDIT

3 Keep touching (to go

backward)/ (to go forward) and release it at the point where you want the recording to start.

bNote

The EDIT SEARCH function does not work for the

tapes recorded on other devices in the Hi8 /

standard 8 mm system.

Reviewing the most recently recorded scenes – Rec review

You can view a few seconds of the scene recorded just before you stopped the tape.

1 Slide the POWER switch repeatedly to select the CAMERA-TAPE mode.

2 Touch .

60min

STBY

0:00:00

EDIT

3 Touch once.

The last few seconds of the most recently recorded scene are played back. Then, your camcorder is set to the standby mode.

bNote

The Rec review function does not work for the tapes

recorded on other devices in the Hi8 /standard

8 mm system.

Recording

Recording 45