Trouble check
Others
Symptom | Causeand/orcorrectiveactions | |
While editing using the DV connecting | • Remove the DV connecting cable, and connect it | |
cable, recording picture cannot be |
| again. |
monitored. |
|
|
|
| |
The camcorder becomes warm. | • If the power of the camcorder is on for a long time, it | |
|
| becomes warm, which is not malfunction. |
|
| |
The supplied Remote Commander does | • Something is blocking the infrared rays. | |
not work. |
| mRemove the obstacle. |
| • | The battery is not inserted with the correct polarity. |
|
| mInsert the battery with the correct polarity. (p. 89) |
| • | The batteries are dead. |
|
| mInsert new ones. (p. 89) |
No function works though the power is on.
•Disconnect the connection plate on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, open the LCD panel and press the RESET button below the MENU button using a
(p. 87)
information Additional
AC power adaptor
Symptom | Correctiveactions |
The VTR/CAMERA or CHARGE lamp | • Disconnect the power cord. After about 1 minute, |
does not light. | reconnect the power cord. (p. 7) |
The CHARGE lamp flashes. | • See the chart on the next page. |
Continued to the next page
81