Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add a sound on your recorded tape by specifying starting and ending points. The original sound will not be erased.
Dubbing with the AUDIO/VIDEO jack
Audio equipment | |
LINE OUT | |
L | R |
AUDIO L | AUDIO R |
AUDIO/ |
|
VIDEO |
|
A/V connecting cable |
|
Ç: Signal flow | Do not connect the |
video (yellow) | |
| plug. |
Note
The picture is not output from the AUDIO/VIDEO jack. Check the recorded picture in the viewfinder or on the LCD screen, as well as check the recorded sound by using a speaker or headphones.
Connecting with the MIC jack
Audio equipment
| LINE OUT | |
MIC | L | R |
(PLUG IN | AUDIO L | AUDIO R |
POWER) | ||
Ç: Signal flow
microphone (not supplied)
Note
You can check the recorded picture and sound connecting the AUDIO/VIDEO jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using TV or headphones.
operations Advanced
65