Getting started

Charging and installing the battery pack

Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC power adaptor.

Charging the battery pack

Charge the battery pack on a flat surface without vibration.

(1) Connect the power cord to a wall outlet.

(2) Align the surface of the battery pack indicated by the zmark with the edge of the terminal shutter of the AC power adaptor. Then fit and slide the battery pack in the direction of the arrow. The CHARGE lamp (orange) lights up. Charging begins.

When the CHARGE lamp goes out, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack in place for approximately one hour. Unplug the unit from the wall outlet, then remove the battery pack and install it into the camcorder. You can also use the battery pack before it is completely charged.

1

2

Charging time

Battery pack

Charging time *

NP-F330 (supplied)

130

(70)

 

 

 

NP-F530

170

(110)

 

 

 

NP-F550

180

(120)

 

 

 

NP-F730

250

(190)

 

 

 

NP-F750

270

(210)

 

 

 

NP-F930

330

(270)

 

 

 

NP-F950

360

(300)

The time required for a normal charge is indicated in parentheses.

*Approximate minutes to charge an empty battery pack using the supplied AC power adaptor. (Lower temperatures require a longer charging time.)

started Getting

7