Trouble check
Operation
Symptom | Causeand/orcorrectiveactions |
The tape does not move when a tape | • The POWER switch is set to CAMERA or OFF. |
transport button is pressed. | m Set it to VTR. (p. 20) |
| • The tape has run out. |
| m Rewind the tape or use a new one. (p. 20) |
No sound or only a low sound is heard | • The volume is turned to the minimum. |
when playing back a tape. | m Open the LCD panel and press VOL +. (p. 20) |
| • AUDIO MIX is set to ST2 side in the menu system. |
| m Adjust AUDIO MIX in the menu system (p. 66). |
The new sound added to the recorded | • AUDIO MIX is set to ST1 side in the menu system. |
tape is not heard. | m Adjust AUDIO MIX in the menu system (p. 66). |
|
|
The SteadyShot function does not activate. | • STEADYSHOT is set to OFF in the menu system. |
| m Set it to ON. (p. 49) |
Recording stops in a few seconds. | • The START/STOP MODE switch is set to 5SEC or |
| ANTI GROUND SHOOTING. |
mSet it to . (p. 14)
The autofocus function does not activate. | • | Focus is set to the manual mode. | |
|
| m | Set it to autofocus. (p. 37) |
| • | Shooting conditions are not suitable for autofocus. | |
|
| m | Set focus to manual mode to focus manually. (p. 37) |
The fader function does not work. | • The START/STOP MODE switch is set to 5SEC or |
| ANTI GROUND SHOOTING. |
mSet it to . (p. 14)
•A title is displayed on the LCD screen or in the viewfinder.
mClear the title. (p. 29)
The title is not displayed. | • TITLE DSPL is set to OFF in the menu system. | |
|
| m Set it to ON in the menu system. (p. 24) |
The title is not recorded. | • The tape has no cassette memory. | |
|
| m Use a tape with cassette memory. (p. 41) |
| • The cassette memory is full. | |
|
| m Erase another title. (p. 43) |
| • | The tape is set to prevent accidental erasure. |
|
| m Slide the protect tab so that red portion is not visible. |
|
| (p. 42) |
| • | Nothing is recorded in that position on the tape. |
|
| m Superimpose the title to the recorded position. (p. 42) |
|
| |
The cassette label is not recorded. | • The tape has no cassette memory. | |
|
| m Use a tape with cassette memory. (p. 46) |
| • The cassette memory is full. | |
|
| m Erase some titles. (p. 43) |
| • | The tape is set to prevent accidental erasure. |
|
| m Slide the protect tab so that red portion is not visible. |
|
| (p. 48) |
|
| |
Displaying the recorded date, date search | • The tape has no cassette memory. | |
function does not work. |
| m Use a tape with cassette memory. (p. 52) |
• CM SEARCH is set to OFF in the menu system. m Set it to ON. (p. 52)
information Additional
Continued to the next page
79