Overview 1 Chapter
Location and Function of Parts
You can switch the scan size of the
4 TAKE/TALLY indicator
TALLY
TAKE REC BATT
5 BATT indicator
6 REC/TALLY indicators
1Eyepiece focusing knob
7 GAIN UP indicator
SHUTTER | GAIN UP |
2 Stopper |
|
8 SHUTTER indicator
Microphone holding screw
Microphone holder
Microphone
Eye cup
9 PEAKING control
0 CONTRAST control qa Tally lamp
qs BRIGHT control
qd Eyepiece release catch
qf TALLY switch qg DISPLAY switch
3 LIGHT switch and light
HIGH LOW OFF | qh Viewfinder connector |
|
LIGHT
Turn this to adjust the viewfinder focus to match your eyesight. (See page 81.)
2StopperLift up when detaching the viewfinder (See page 31).
3LIGHT switch and lightThe light lights the lens and the switch controls the light as follows.
HIGH/LOW: Turn the light on and control the brightness.
OFF: Turns the lights off.
This indicator functions as a green tally lamp when the CCU is connected with this camera.
5BATT (battery) indicator (red)This lights when the battery capacity is low.
20 Chapter 1 Overview