010COV.book Page 10 Wednesday, August 25, 2010 12:06 PM
Let’s get the photo frame ready
PNote
If the remote control stops working:
Replace the battery (CR2025 lithium battery) with a new one.
PWARNING
•Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
•When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
Replacing procedures:
zTips
xWhen the photo frame is placed in the portrait orientation
The display is automatically rotated on the portrait orientation.
xSony logo
When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.
Remote control
Pull out the protective sheet before use as shown in the figure.
Protective sheet
Using the remote control
Point the top end of the remote control towards the remote sensor on the photo frame.
Stand
Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel.
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
