Notes

•You cannot connect a PictBridge- compliant digital camera and a PC simultaneously to the printer. When printing from a digital camera, remove the PC from the printer.

•The connector is designed for the PictBridge only. Never connect a device other than a PictBridge- compliant digital camera.

•The type of USB cable you should use may differ depending on the digital camera. Use a USB cable with an A- TYPE connector for the printer and an appropriate type for your digital camera.

•If you use a commercially available USB cable, please use the one shorter than 3m in length.

When you connect a PictBridge- compliant digital camera to the printer

The printer automatically enters the PictBridge mode. The PICTBRIDGE indicator turns to green.

PICTBRIDGE indicator

5 Operate the digital camera to print an image.

The printer supports the following prints:

•Single-image print.

•All images print

•Index print

•DPOF print

•Border/Borderless print

•Date print

Notes on printing

•If you replace a print cartridge while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. If this occurs, disconnect and then connect the digital camera.

•Never move or turn off the printer while it is printing; the print cartridge or paper may become stuck. In case you turn off the power, keep the paper tray inserted and then turn on the printer. If paper being printed remains in the printer, remove the paper that emerged automatically and resume printing from the step 1.

•The print paper emerges a few times during printing. Do not touch nor pull the emerged paper. Wait for the print paper to be fully ejected after printing ends.

•As the print paper emerges from the rear a few times during printing, make sure to spare enough space behind the printer during printing.

•If print paper runs out during continuous printing or if you print with no print paper in the paper tray, the printer’s ERROR indicator lights. Feed the print paper without turning off the power and resume printing.

On the PICTBRIDGE indicator

The PICTBRIDGE indicator shows the connection status between the printer and the digital camera as follows:

•When the indication lights: The connection between the printer and the PictBridge- compliant digital camera is established.

•When the indication blinks: The device that does not support the PictBridge feature is connected. Or the image to be printed is damaged.

18 GB