6 Check “I accept the terms of the license agreement” and click “Next”.

If you check “I do not accept the terms of the license agreement”, you cannot proceed to the next step.

The “Ready to install the program” dialog box is displayed.

7 Click “Install”.

The “Printer connection” dialog box is displayed.

8 Connect the printer to the AC power source (page 16).

9 Press 1 (on/standby) switch to turn on the printer (page 17).

The 1 (on/standby) indicator of the printer lights in yellow green.

10 Click “Next”.

11 Connect the USB connectors of the printer and your computer.

To USB connector (B-TYPE)

 

To USB

Windows PC

connector

The printer automatically enters the PC mode and the printer setup will start automatically.

When the printer setup is complete, the “InstallShield Wizard Complete” dialog box is displayed.

Note

In case you use commercially available USB cable, use a B-type USB cable shorter than 3m in length.

12 Click “Finish”.

The installation of the printer driver is complete. When you are prompted to restart your computer, restart the computer.

13 • To finish installation, click “Complete” and remove the CD-ROM from your computer and keep it for future use.

•To continue to install the Picture Motion Browser software, click “Installing the Picture Motion Browser” and follow the procedures on page 23.

Continued

PC a from Printing

21 GB