Sony DPP-FP35 manual 37

Symptom	Check	Cause/Solutions
An image is	• Are you using an	c When using an application other than the
printed with	application software	Picture Motion Browser, an image might be
borders even if I	other than Picture	printed with borders even if you select
select borderless	Motion Browser?	borderless print. If this occurs, do either of the
print option.		following to print an image without borders:
		– When you can set print range with an
		application, set an image to be printed
		fully in the print range even if it is printed
		over the range.
		– Set a larger value in the “Enlarge/Reduce”
		text box in the “Paper/Output” tab of the
		“Sony DPP-FP35 Properties” dialog box.
		(.page 28)
		– If borders remain on the right and bottom
		sides of a printed image even after you set a
		larger value, check “Upper left reference”.
An image is not	• Is “Exif Print” checked	cThe Exif Print setting in the “Color
printed in correct	in the “Graphics” tab	reproduction/Picture quality” section
colors.	of the “Sony DPP-FP35	supports the Picture Motion Browser only.
	Properties” dialog	To print from other application, uncheck
	box?	“Exif Print”.
	• Is “ICM” selected in	cThe ICM setting may be valid only when
	the “Graphics” tab of	you are using an ICM-compliant application.
	the “Sony DPP-FP35	Check to see if the application software you
	Properties” dialog	are using supports ICM.
	box?
Preview image does		cThe print settings adjust the printer itself
not reflect the print		and cannot influence the preview image.
settings in the
“Graphics” tab of
the “Sony DPP-FP35
Properties” dialog
box.
Print quantity		c Depending on the application software you
specified in the		use, the print quantity setting of the application
“Paper/Output” tab		software may have priority over the setting
of the “Sony DPP-		specified in the printer driver dialog box.
FP35 Properties”
dialog box does not
take effect.

Troubleshooting

37 GB