Remote control

AD

BE C

F

ASLIDE SHOW button (page 17)

BPRINT button (page 18)

CMENU button*

•Functions operate the same as the MENU buttons on the camera.

•However, “Retouch” function of the Viewing menu cannot be used.

D1 (on/standby) button (page 17)

•To turn on the printer, press 1 to turn on the 1 indicator in yellow green.

•To turn off the printer, press 1 again to turn on the 1 indicator in red.

E (Index) button

•Press the side to switch to the index screen.

•Press the side again to switch to the index screen with smaller thumbnails.

•Press the other side to return to the previous index screen.

FControl buttons (v/V/b/B/)*

•Press v/V/b/B to select the images or the MENU items.

•Press to confirm the selection.

*For details, refer to the Instruction Manual supplied with the camera and the Cyber-shot Handbook.

PNotes

•Remove the insulation sheet before using the remote control.

Insulation sheet

•Point the remote control towards the remote sensor on the camera adaptor to operate your camera.

To change the battery of the remote control

1While pressing on the tab, inset your fingernail into the slit to pull out the battery case.

2Place a new battery with the + side facing up.

3Insert the battery case back into the remote control until it clicks.

Tab

Caution

Risk of Explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to instructions.

WARNING

Battery may explode if mistreated.

Do not rechage, disassemble or despose of in fire.

•The remote control has a button type lithium battery (CR2025) built in. Do not use batteries other than CR2025.

10