Charging the battery pack

Turn off the camera and place the camera with the battery pack inserted on the camera adaptor. Charging starts automatically. The CHARGE indicator of the camera adaptor lights up.

•When the camera is turned on, the camera adaptor stops charging the battery pack.

•When the charging reaches to Normal charge*, the CHARGE indicator goes off.

*Recording and playback time with Normal charge is approximately 90% of Full charge.

•The time of the full-charge for a completely discharged battery at the temperature of 25 °C (77 °F) is approximately 230 minutes.

It may take longer to charge, depending on the charging condition and environment.

•If the motor in the printer is still running, turn off the camera after the motor stops running. You cannot charge the battery while the motor is running.

•If CHARGE indicator fails to light or blinks for more than 10 seconds, refer to “Troubleshooting”.

•After attaching the camera to the camera adaptor, the CHARGE indicator may flash for 3 to 10 seconds. This indicates communication between the camera and the camera adaptor, and it is not a malfunction.

Charging temperature

The temperature range for charging is 0 °C to 40 °C (32 °F to 104 °F). However, to provide maximum battery efficiency, the recommended temperature range when charging is 10 °C to 30 °C (50 °F to 86 °F).

20