If paper jams

If the print paper jams, the ERROR indicator lights or flashes rapidly and printing stops.

When the ERROR indicator lights, remove the print paper and resume printing.

When the ERROR indicator flashes rapidly, disconnect the AC power cord (mains lead) from the wall outlet (wall socket), then insert it again. When the printer’s initial loading process ends, remove the paper tray from the printer. Check if there is jammed paper in the paper outlet or feeding slot of the printer and remove the jammed paper, if any.

ERROR indicator

PNote

If you cannot remove the jammed paper, contact your Sony dealer or service facilities.

Cleaning the inside of the printer

If white lines or periodical dots are printed on the pictures, use the cleaning cartridge supplied and the cleaning sheet of the supplied printing pack to clean inside the printer.

1 Open the ink ribbon compartment cover and if there is an ink ribbon, remove it (page 12).

2 Insert the supplied cleaning cartridge into the printer and close the ink ribbon compartment cover.

3 Remove the paper tray from the printer. If there is print paper in the tray, remove the print paper from the tray.

25