Exiting the menu

1 Press g/G to select (Exit) and then press ENTER.

The confirmation window is displayed.

2 Press f/F to select “OK”, and press

ENTER.

The menu operations are terminated and the window displayed before entering the menu is displayed again.

If you press CANCEL or select “CANCEL” and press ENTER, the previous window is displayed.

Making layout prints

1 From the main menu (page 18), press g/G/f/F to select (Layout Print), then press ENTER.

The Layout Print templates are displayed.
2 Press g/G/f/F to select the desired template, then press ENTER.
The preview of the selected template is displayed
3 Select an image.

When you select a template with multiple images, repeat the procedures below to select an image for each area.

1Press g/G/f/F to select an image area, then press ENTER.
The image list is displayed.
2Press g/G/f/F to select the desired image, then press ENTER.
The window used for adjusting the image is displayed.
For adjustment, see “Adjusting an image” on page 21.

You can adjust red-eye phenomenon automatically by pressing the (Red-eye Correction) button (page 20).

After the Red-eye Correction is performed, you cannot do other adjustments. Make sure to perform the Red-eye Correction after you finish other adjustments.

4 Press g/G to select and press

ENTER.

The selected image is added to the image area.

5 Press PRINT.

printing Direct

Continued

23 GB