Red-eye Correction

1 Display an image that you want to

adjust and then press (Red- eye Correction).

Red-eye Correction of the selected image starts. The results of the adjustment will be displayed on the screen.

To display the original image (Before correction) again

Press (Red-eye Correction). To display the adjusted image, press again.

To cancel correction

Press CANCEL.

Tip

Although you can check the red-eye correction status by pressing ENTER and enlarging an image, the image to be printed is not enlarged. To print an enlarged and red-eye-corrected image, first enlarge an image and then perform red-eye correction.

If you have set print quantity for multiple images

All the images with print quantity settings are adjusted. To display other images, press g/G.

To set the print quantity

Before you start red-eye correction, set the print quantity (page 16). You cannot set or change print quantity after you finish the red-eye correction. To change the print quantity setting, cancel the red-eye correction.

Tips

•If there are no images with print quantity settings, the Red-eye Correction adjusts the image being previewed.

•If there are other images with print quantity setting, and print quantity is not specified for the image being previewed, the image being previewed will not be corrected. The images with print quantity settings will be adjusted.

•If you enlarged an image, only the enlarged image will be adjusted and then printed.

2 Press PRINT.

Printing of the image being adjusted starts. When the print quantity setting is specified, the specified number of copies are printed.

Tips

•Adjustment takes effect only on the image being printed. The original image will not be adjusted.

•You cannot perform editing on an image after

Red-eye Correction.

Notes

•Depending on the image, the red-eye phenomenon may not be corrected.

•When you cancel the edits by selecting (Reset) in the Edit menu, the Red-eye Correction will also

be cancelled.

•During the Red-eye Correction process, an animation to show reading and handling of data from a memory card or a USB memory will be displayed. While the animation is displayed, do not remove the memory card or disconnect USB memory.

The automatic red-eye correction of this printer uses the technology of FotoNation Inc. in the U.S.A.

20 GB