Installing the Picture Motion Browser

Follow the procedures below to install the Picture Motion Browser.

Notes

•Please log on to Windows using a “Computer administrator” user account.

•Be sure to close all running programs before installing the software.

•The dialog boxes shown in this section are from Windows Vista, unless otherwise specified. The installation procedures and the dialog boxes shown differ depending on the operating system.

1 Turn on your PC, start Windows, and insert the supplied CD-ROM into the CD-ROM drive of your PC.

The installation window is displayed (page 35).

2 Click “Installing Picture Motion Browser”.

The “Choose Setup Language” dialog box is displayed.

3 Select your language and click “Next”.

The “InstallShield Wizard” dialog box is displayed.

4 Click “Next”.

The license agreement dialog box is displayed.

5 Read the agreement thoroughly, and if you agree, check “I accept the terms of the license agreement” and click “Next”.

The dialog box used to specify the destination is displayed.

6 Check the destination and then click “Next”.

The dialog box notifying you that the program is ready to be installed is displayed.

7 Click “Install” and follow the instructions on the screen to proceed with installation.

When you are prompted to restart your PC, follow the displayed instructions to restart it.

8 When the installation is complete, remove the CD-ROM from your PC and keep it for future use.

Notes

•If the installation fails, perform the installation procedures from step 2 again.

•The supplied CD-ROM will be required when you uninstall or re-install the Picture Motion Browser. Keep it in a safe place for possible future use.

38 GB