Making an ID photo
1 From the main menu (page 18), press g/G/f/F to select 
(ID Photo) and then press ENTER.
The window used for setting the height and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x 9.0 (height) cm.
2 Press g/G/f/F to select “Height” or “Width” to be adjusted and press
ENTER.
The cursor moves to the number input area of the selected item.
•To specify the unit: Select either “cm” or “inch”.
•To specify the height: Select the figure box at the right of the photo frame.
•To specify the width: Select the figure box in the upper of the photo frame.
3 Press f/F to set the size and then press ENTER.
The ID photo preview of the specified size is displayed.
4 If you want to specify another size, repeat steps 2 and 3.
24 GB
5 Press f/F to select 
and press
ENTER.
The window used for selecting an image is displayed.
6 Press g/G/f/F to select the desired image, and then press ENTER.
The window used for adjusting the image position is displayed.
For adjustment, see step “Adjusting an image” on page 21.
You can also change a color photo into a monochrome one. Select 
(Monochrome) and press ENTER. You can select this option while making an ID Photo.
7 Press g/G to select 
and press
ENTER.
A preview of the ID photo print is displayed.
8 Press PRINT.
Note
An ID photo printed may not be able to be acceptable for use in an identification card or passport. Please check the requirements for the photo to be used in the instructions before you submit the card or passport.