Symptom | Check | Cause/Solutions |
Even if |
| c When you use an editing/recording device |
“Borderless” is |
| other than the printer to edit or save an |
selected, the image |
| image, the image is saved with blank areas |
is printed with | — | around the image. Even if you print it with |
borders on both |
| the “Borderless” setting, you cannot |
sides. |
| eliminate the borders on both sides of a |
|
| |
|
| print. |
|
|
|
The whole area of | • Did you select “Borders | c You can print the whole area of an image |
an image cannot | (Pattern 1)”? | by selecting “Borders (Pattern 1)”. |
be printed. |
| |
|
| |
|
|
|
The image is | • Is the paper tray inserted | c |
printed at an angle. | properly? | to the end. |
|
|
|
There are white |
| c The print head or paper path may be |
lines or dots on the | — | soiled. Use the supplied cleaning cartridge |
printed pictures. |
| and sheet to clean the head and path. |
|
|
|
The picture is too |
| c You can adjust the image. |
bright, dark, | — | |
reddish, yellowish, |
| |
|
| |
or greenish. |
|
|
|
|
|
The Edit menu | • Did you enlarge, reduce the | c You cannot use the Edit menu after |
cannot be used. | size of, rotate, or move an | performing |
| image after performing Red- | button. Select the Edit menu and |
| eye Correction with the | perform these editorial operations first, |
| button? | and then perform |
|
|
|
Settings
Symptom | Check | Cause/Solutions |
The Borders/ | • Are you using the Layout | c In the Layout Print menu, templates are |
Borderless setting | Print menu? | used and you cannot select Borders/ |
does not take |
| Borderless Print. |
effect. |
|
|
|
|
|
Troubleshooting
Continued