Sony DPS5032N operating instructions Selecting Area Code, Changing the 4-digit code

Selecting Area Code

Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Area Code List”, page 55-56.).

Disc Audio	Code Set
Disc Subtitle	U S
Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Digital Audio Output

Others

1.Select Area Code using the V/v on the setup menu.

2.While Area Code is selected, press b.

3.Follow step 3 of “Rating” on previous page.

4.Select the first character using the V/v.

5.Shift the cursor using b and select the second character using V/v.

6.Press ENTER to confirm your country code selection, then press SET UP to exit the menu.

DVD

NOTE:

Confirmation of the 4-digit password is necessary when the code is changed

(see “Changing the 4-digit code” below.).

Changing the 4-digit code

1Follow Steps 1-2 as shown to the previous page (Rating).

2Enter the old code, then press ENTER.

3Select Change using V/v then press ENTER.

4Enter the new 4-digit code, then press ENTER.

5Enter exactly the same code a second time and verify by pressing ENTER.

6Press SET UP to exit the menu.

If you forget your 4-digit code

If you forget your password, to clear the current password, follow the procedure below.

1Press SET UP to display the setup menu.

2Use the Number buttons to enter the 6-digit num- ber “210499”.

3Enter a new code as shown to the previous page (Rating).

48