•OFF •CAM

•PLAY

MENU

EXCUTE

EXIT

6 Set the year using the 4(UP)/$(DOWN) buttons and then press the EXECUTE button.

The month can now be set.

7 Set the month, day, hour, minutes and seconds in the same way as explained in step 5.

8 Select “Date Form” using the 4(UP)/$(DOWN) buttons and then press the EXECUTE button.

You can now select the date display format.

9 Select the date display format using the 4(UP)/ $(DOWN) buttons and then press the EXECUTE button.

You can choose from the following 3 date display formats. [yyyy] indicates year, [mm] indicates month and [dd] indicates day.

yyyy-mm-dd (ex:1999-07-04) dd-mm-yyyy (ex:04-07-1999) mm-dd-yyyy (ex:07-04-1999)

10 Press the EXIT button.

The time and date are set and the menu returns on the LCD monitor.

11 Press the EXIT button.

10,11

The menu disappears from the monitor.

Keeping correct time

A separate lithium button battery is used by the camera to power the internal clock. When turning the power dial to CAM or PLAY from OFF, if the message “Date & Time not set” appears, it is time to charge the lithium button battery.

Inquire about charging the battery at the store where you bought the camera or at any Sony service center.

Preparations

27 GB